学术论文

1.Structure and Field-Emission Properties of Sub-Micrometer-Sized Tungsten-Whisker Arrays Fabricated by Vapor Deposition

2.ZrC ablation protective coating for carbon/carbon composites

3.New insights into the microstructure of the friction surface layer of C/C composites

4.New alkylthienyl substituted benzo[1,2-b:4,5-b]dithiophene-based polymers for high performance solar cells

5.Low cost preparation of high thermal conductivity carbon blocks with ultra-high anisotropy from a commercial graphite paper

6.Synthesis and optical property of large-scale centimetres-long silicon carbied nanowires by catalyst-free CVD route superatmospheric prissure conditions

7.Synthesis, growth mechanism and thermal stability of copper nanoparticles encapsulated by multi-layer graphene

8.Effect of carrier gas on bulk density and microstructure distribution of carbon/carbon composites fabricated by thermal gradient chemical vapor infiltration

9.Electrochemical performance of porous Ni3Al electrodes for hydrogen evolution reaction

10.First principles study of various Zr-H phases with low H concentrations

11.First-principles based modeling of hydrogen permeation through Pd-Cu alloys

12.Mechanical and structural stability of zirconium dihydride

13.Structural stability, mechanical property and elastic anisotropy of TiAl-H system

14.Weak magnetic field-enhanced glass formation in non-ferromagnetic Al-based alloys

15.Structural evolution and ablation mechanism of a hafnium carbide coating on a C/C composite in an oxyacetylene torch environmen

16.Oxidation behavior of C/C composites with the fibre/matrix interface modified by carbon nanotubes grown in situ at low temperature

17.Fabrication of tungsten carbide-vanadium carbide core-shell structure powders and their application as an inhibitor for the sintering of cemented carbides

18.Hot corrosion of a novel (Ni,Co)O/(Ni,Co)Fe2O4 composite coating thermally converted from an electrodeposited Ni-Co-Fe2O3 composite coating

19.First-principles study of the critical thickness in asymmetric ferroelectric tunnel junctions

20.Low bandgap isoindigo-based copolymers,design,synthesis and photovoltaic applications

21.Significantly enhanced structural and thermal staability of anodized anatase nanotube arrays induced by tensile strain

22.Native defects in LiNH2:A first-principles study

23.The catalytic effect of boric acid on polyacrylonitrile-based carbon fibers and the thermalconductivity of carbon/carbon

24.Oxidation behavior of C/SiC composites with a SiC/Mo–Si multilayer coating

25.The effect of Ti atom on hydrogenation of Al(111) surface: First-principles studies

26.Manufacture and properties of carbon fibre-reinforced C/SiC dual matrix composites

27.Diffusivities of an Al-Fe-Ni melt and their effects on the microstructure during solidification

28.Thermodynamic properties of the Al-Fe-Ni system acquired via a hybrid approach of calorimetry, first-principles and calphad

29.A multilayer coating of dense SiC alternated with porous Si-Mo for the oxidation protection of carbon/carbon silicon carbide composites

30.Atomic mobilities, diffusivities and simulation of diffusion growths in the Co-Si system

专利信息

1.可降解血管吻合套及其制备方法

2.硬质合金脱险成型剂工艺中的精确控碳方法

3.一种孔隙非均匀分布仿生骨质材料制造方法

4.一种稀土氧化物无铅易切削黄铜及其制备方法

5.一种离子交换色层法分离提纯Yb2O3用的淋洗剂

6.空间用银基固体自润滑电刷及制备方法*

7.Si3N4基金属陶瓷及其制备方法

8.一种均匀可调送粉装置

9.粉末注射成形用催化剂脱脂型粘结剂及其喂料的制备方法

10.托辊用高性能聚合物基复合材料及其制备方法

11.一种具有线性超弹性的Ni-Fe-Al合金及其制备方法

12.基于压差法快速CVI涂层的炭纸性能改善方法和装置

13.一种高温强韧化碳化物增强钼合金及制备方法*

14.一种颗粒增强钛基复合材料及制备方法

15.一种炭/炭复合材料表面抗烧蚀复合涂层及制备方法及应用

16.一种制备钼铜合金零部件的方法

17.一种炭纤维增强碳化硼复合材料及其制备方法

18.一种TiAl基合金高温双层隔氧包套制作方法

19.一种烧结炉炉内气氛中S杂质含量水平的标定方法

20.一种惰性阳极熔盐电解制备硅颗粒的方法

21.一种铝铜镁银系粉末冶金耐热铝合金及其制备方法
22.风力发电机用树脂基偏航刹车片及其制备方法
23.一种高温抗蚀导电复合材料
24.一种炭纤维增强炭和六方氮化硼双基体摩擦材料的制备方法
25.一种铜硅合金改性炭/陶摩擦材料的制备方法
26.一种梯度结构硬质合金的制备方法
27.一种表层钴含量呈梯度变化的硬质合金的制备工艺
28.一种具有高硬度高韧性双高性能WC基硬质合金的制备方法
29.一种制备泡沫TiAl金属间化合物的方法
30.一种采用Co-Cu作为粘结相的硬质合金材料及其制备方法

31.一种改善WC-Co硬质合金耐腐蚀性能的方法
32.一种微合金化氧化物弥散强化铁素体钢及制备方法
33.一种双晶结构氧化物弥散强化铁素体钢及制备方法
34.一种多相颗粒增强的粉末冶金钛基复合材料及其制备方法
35.一种化学气相渗透增密用多料柱式工业炉
36.一种超细晶粒硬质合金的制备方法
37.一种强化硬质合金粘结相的方法
38.微波烧结保温装置
39.托辊用高性能聚合物基复合材料及其制备方法
40.粉末注射成形用催化剂脱脂型粘结剂及其喂料的制备方法

41.CTBN改性酚醛树脂增强炭纤维纸强度的工艺
42.一种高硬度粉末冶金合金钢
43.一种超细晶碳化钨/钴系复合粉的制备方法
44.一种玻璃陶瓷基汽车刹车片及其制备方法
45.一种高钨含量的高致密细晶钨铜材料及其制备方法
46.一种包覆结构硬质合金的制备方法
47.一种中空结构金属或陶瓷零部件的制备方法
48.一种表层脱碳WC-Co梯度硬质合金预制体的制备工艺
49.一种碳化钨/钴系多孔材料的制备方法
50.一种自组装纳米结构氧化亚镍粉末的制备方法

51.金属熔盐电解用陶瓷基阳极及其制备与组装方法