1999 年-2006 年，中南大学材料科学与工程学院，硕博连读，博士学位

1995 年-1999 年，材料科学与工程学院，材料加工工程专业，学士学位

(1) TANG Jian-guo; ZHANG Xin-ming; CHEN Zhi-yong; DENG Yun-lai , Finite element simulation of influences of grain interaction on rolling textures of fcc metals, Journal of Central South University, 2006, 13 ( 2 ): 117-121 .

(2) Tang Jian-Guo; Zhang Xin-Ming; Deng Yun-Lai; Du Yu-Xuan; Chen Zhi-Yong , Texture decomposition with particle swarm optimization method, Computational Materials Science, 2006, 38 ( 2 ): 395–399 .

(3) 唐建国; 张新明; 肖亚庆; 邓运来 , 微量杂质对高纯铝再结晶影响的Monte Carlo 模拟, 材料热处理学报, 2006, 27 ( 6 ): 124-128 .

(4) 唐建国;张新明;徐敏;欧军 , 3104铝合金热粗轧板的织构梯度及其对热压缩变形后退火织构演变的影响, 中国有色金属学报, 2010, 20 ( 10 ): 1932-1940 .

(5) Tang Jian-guo; Chen Hui; Zhang Xin-ming; Liu Sheng-dan; Liu Wen-jun; Ouyang Hui;Li Hong-ping , Influence of quench-induced precipitation on aging behavior of Al-Zn-Mg-Cu alloy, Transactions of Nonferrous Metals Society of China, 2012, 22 ( 6 ): 1255-1263 .

(6) TANG Jian-guo; HUANG Xing-xing; ZHANG Xin-ming , Hot-compression behavior of Al alloy 5182, Journal of Central South University, 2012, 12 ( 8 ): 2073?2080 .

(7) C. Qian; J.G. Tang; X. M. Zhang; C. P. Tang; and Y. L. Deng , Decomposing textures of hexagonal magnesium alloys with fiber component, Crystal Research Technology, 2013, 48 ( 8 ): 555-565 .

(8) G.J. Zhou; J.G. Tang; Y. Zhou; W.K. An; An.H. Cai , Phase equilibria in the Co–Ti–V system at 873 K, Journal of Alloys and Compounds, 2014, 602 ( ): 49–52 .

(9) Liang.Chen; Jianguo.Tang; Shengdan.Liu; Xinming.Zhang , Through-thickness Strain and Texture Gradients of Al-Mg-Si-Cu Alloy Sheets produced by Snake Rolling, Applied Mechanics and Materials, 2014, 628 ( ): 79-83 .

(10) 刘星兴;唐建国;张新明;谈奇;王莹莹;邓运来 , 双级淬火对车身板用6016铝合金烤漆硬化效应的影响, 中国有色金属学报, 2014, 24 ( 5 ): 1186-1193 .

(11) Cong-hui LIU; Xin-ming ZHANG; Jian-guo TANG ; Xing-xing LIU; Liang CHEN , Effect of copper on precipitation and baking hardening behavior of Al-Mg-Si alloys, Transactions of Nonferrous Metals Society of China, 2014, 24 ( 7 ): 2289-2294 .

(12) 李翔;唐建国;张新明 ;凌利月;刘文辉;廖志宇;杨涛;邓运来 , 温变形对汽车车身用6061铝合金自然时效及力学性能的影响, 中国有色金属学报, 2016, 26 ( 1 ): 1-6 .

(13) 陈冠;杨荣凯;唐建国;廖志宇 , AA3003铸轧铝合金的等温析出动力学, 中国有色金属学报, 2017, 27 ( 12 ): 2460-2466 .

(14) 凌利月;唐建国;刘文辉;张新明;陈亮;邓运来 , 蛇形轧制对Al-Mg-Si合金板材剪切变形及织构影响的模拟, 中南大学学报（自然科学版）, 2017, 48 ( 9 ): 2279-2287 .

(16) 申澎洋;唐建国;叶凌英;段程雄;邓运来 , 组织不均匀性对6005A铝合金晶间腐蚀性能的影响, 材料研究学报, 2018, 32 ( 10 ): 751-758 .

(17) 王勇;唐建国;邓运来 ;林化强;单朝军;张勇;刘胜胆;叶凌英 , 时效状态对7020 铝合金疲劳性能的影响, 中南大学学报（自然科学版）, 2018, 49 ( 11 ): 2684-2691 .

(18) 廖培;唐建国;刘胜胆;叶凌英;涂文斌;张勇;黄元春 , 淬火速率对 6016 铝合金显微组织及力学性能的影响, 中南大学学报（自然科学版）, 2018, 49 ( 12 ): 1-8 .

(19) Mingyang Chen; Yunlai Deng; Jianguo Tang; Shitong Fan; Xinming Zhang , A study of the crystallographic pitting behavior of Al-0.54Mg-0.66Si aluminum alloy in acidic chloride solutions, Materials Characterization, 2019, 148 ( ): 259-265 .

(20) Renke Wang; Hui Zhang; Lin Tang; Jianbo Shao; Zhu Xiao; Zhiyong Chen; Chuming Liu; Jianguo Tang , Adiabatic shear deformation behaviors of cold-rolled copper under different impact loading directions, Materials Science & Engineering A, 2019, 754 ( ): 330-338 .

(21) Jianguo Tang; Yidan Zhang; Lingying Ye; Meng Qu; Jianshan Wu; Zhen Zhang; Shengdan Liu; and Yunlai Deng , Effect of Grain Boundary and Crystallographic Orientation on the Stress Corrosion Behavior of an Al-Zn-Mg Alloy, Journal of Materials Engineering and Performance, 2019, 28 ( 5 ): 2954-2966 .

(22) Wenbin Tu; Jianguo Tang; Yong Zhang; Lingfei Cao; Lehang Ma; Qianqian Zhu; Lingying Ye; Shengdan Liu , Influence of Sn on the precipitation and hardening response of natural aged Al-0.4Mg-1.0Si alloy artificial aged at different temperatures, Materials Science & Engineering A, 2019, 765 ( ): 138250 .

(23) Jianguo Tang; Zhenshen Yang; Shendang Liu; Qing Wang;Jingchao Chen; Wenru Chai; Lingying Ye , Quench Sensitivity of AA 7136 Alloy: Contribution of Grain Structure and Dispersoids, Metallurgical and Materials Transactions A, 2019, 50A ( 10 ): 4900-4912 .

(24) Jiuhui Zhao; Yunlai Deng; Jianguo Tang; Jin Zhang , Influence of strain rate on hot deformation behavior and recrystallization behavior under isothermal compression of Al-Zn-Mg-Cu alloy , Journal of Alloys and Compounds, 2019, 809 ( ): 151788 .

(25) Qingsong Dai; Yunlai Deng; Haichun Jiang; Jianguo Tang; Jiqiang Chen , Hot tensile deformation behaviors and a phenomenological AA5083 aluminum alloy fracture damage model, Materials Science and Engineering A, 2019, 766 ( ): 138325 .

(26) Jiuhui Zhao; Yunlai Deng; Jin Zhang; Jianguo Tang , Effect of forging speed on the formability, microstructure and mechanical properties of isothermal precision forged of Al–Zn–Mg–Cu alloy, Materials Science and Engineering A, 2019, 767 ( ): 138366 .

(27) Wenbin Tu; Jianguo Tang; Yong Zhang; Lingying Ye; Shengdan Liu; Jinkun Lu; Xin Zhan; ChengboLi , Effect of Sn and Cu addition on the precipitation and hardening behavior of Al-1.0Mg-0.6Si alloy, Materials Science and Engineering A, 2020, 770 ( ): 138515 .