论文 ：

(1) Yanbin Jiang, Guoyi Tang, Chanhung Shek, Yaohua Zhu. On thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in aged Mg-9Al-1Zn alloy. Acta Materialia, 2009, 57: 4797-4808.

(2) Chunyang Wang, Xinhua Liu, Yanbin Jiang*, Jianxin Xie, Xiaojun Zhang,Dejing Zhou. Effects of annealing and cold roll-bonded interface on the microstructure and mechanical properties of the embedded aluminum-steel composite sheet. Science Bulletin. 2018,63(21):1448-1456 (通讯作者).

(3) Yanbin Jiang, Guoyi Tang, Chanhung Shek, Wei Liu. Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment. Journal of Alloys and Compounds，2011,509:4308-4313.

(4) Yanbin Jiang, Guoyi Tang, Chanhung Shek, Jianxin Xie, Zhuohui Xu, Zhihao Zhang. Mechanism of electropulsing induced recrystallization in a cold-rolled Mg-9Al-1Zn alloy. Journal of Alloys and Compounds，2012,536:94-105.

(5) Yanbin Jiang, Lei Guan, Guoyi Tang, Zhihao Zhang. Improved mechanical properties of Mg–9Al–1Zn alloy by the combination of aging, cold-rolling and electropulsing treatment. Journal of Alloys and Compounds，2015,626:297-303.

(6) Yanbin Jiang, Lei Guan, Guo-yi Tang. Recrystallization and Texture Evolution of Cold-Rolled AZ31 Mg Alloy Treated by Rapid Thermal annealing. Journal of Alloys and Compounds，2016, 656:272-277.

(7) Yanbin Jiang, Xiaodong Mao, Yu Lei, Xinhua Liua,Yihan Wang, Jianxin Xie. Microstructure and mechanical property evolutions of CuNi10Fe1.8Mn1 alloy produced by HCCM horizontal continuous casting during drawing and its deformation mechanism. Journal of Alloys and Compounds. 2019,771:905-913

(8) Hongtao Zhang, Yanbin Jiang*, Jianxin Xie, Yonghua Li, Lijuan Yue. Precipitation behavior, microstructure and properties of aged Cu-1.7 wt% Be alloy. Journal of Alloys and Compounds. 2019,773:1121-1130 (通讯作者).

(9) Zhihao Zhang, Yanbin Jiang*, Yongtai Chen. Microstructure and deformation mechanism of Ag-12wt% SnO2 composite during hot compression. Journal of Alloys and Compounds. 2017,728:719-726 (通讯作者).

(10) Muzhi Ma, Zhou Li*, Wenting Qiu , Zhu Xiao*, Ziqian Zhao, Yanbin Jiang*. Microstructure and properties of Cu-Mg-Ca alloy processed by equal channel angular pressing. Journal of Alloys and Compounds. 2019,771:905-913 (通讯作者).

(11) Xiaoli Guo, Zhu Xiao*, Wenting Qiu, Zhou Li*, Ziqian Zhao, Xu Wang, Yanbin Jiang*. Microstructure and properties of Cu-Cr-Nb alloy with high strength, high electrical conductivity and good softening resistance performance at elevated temperature. Materials Science and Engineering A, 2019,749:281-290 (通讯作者)

(12) Yanbin Jiang, Lei Guan, Guoyi Tang, Chanhung Shek, Zhihao Zhang. Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg-9Al-1Zn alloy strip. Materials Science and Engineering A, 2011, 528: 5627-5635.

(13) Chunyang Wang，Yanbin Jiang *， Jianxin Xie， Zhou Dejing, Zhang Xiaojun. Interface formation and bonding mechanism of embedded aluminum-steel composite sheet during cold roll bonding. Materials Science and Engineering A, 2017, 708:50-59(通讯作者)

(14) Yongda Mo, Yanbin Jiang*, Xinhua Liu, Jianxin Xie. Effects of microstructure on the deformation behavior, mechanical properties and residual stress of cold-rolled HAl77-2 aluminum brass tube. Journal of Material Processing and Technology, 2016, 235: 75-84. (通讯作者)

(15) Yanbin Jiang, Lei Guan, Guo-yi Tang, Bo Cheng and Da-bo Liu. Microstructure and Texture Evolution of Mg–3Zn–1Al Magnesium Alloy during Large-Strain Electroplastic Rolling. International Journal of Minerals Metallurgy and Materials, 2015,22(4):411-416.

(16) Yanbin Jiang, Xu Jun, Liu Xinhua, Xie Jianxin. Effects of Fe content on microstructure and properties of CuNi10FeMn1 alloy tubes fabricated by HCCM horizontal continuous casting. International Journal of Minerals Metallurgy and Materials, 2016,23(4):449-459.

(17) Yanbin Jiang, Guoyi Tang, Lei Guan, Shaonan Wang, Zhuohui Xu, Chanhung Shek, Yaohua Zhu. The effect of electropulsing treatment on the solid solution behavior of aged Mg alloy AZ61 strip. Journal of Materials Research. 2008,23, 2685-2691.

(18) Yanbin Jiang, Guoyi Tang, Chanhung Shek, Yaohua Zhu, Lei Guan, Shaonan Wang, Zhuohui Xu. Improved ductility of aged Mg-9Al-1Zn alloy strip by electropulsing treatment. Journal of Materials Research. 2009,24:1810-1814.

(19) Yanbin Jiang, Guoyi Tang, Chanhung Shek, Yaohua Zhu. Effect of electropulsing treatment on microstructure and tensile fracture behavior of aged Mg-9Al-1Zn alloy strip. Appl Phys A, 2009, 97:607-615.

(20) Zhihao Zhang, Jie Xue, Yanbin Jiang*, Feng Jin. Effect of pre-annealing treatment on microstructure and mechanical properties of extruded Al-Zn-Mg-Cu alloy bars. International Journal of Minerals Metallurgy and Materials, 2017, 24:1284-1292.( 通讯作者)

(21) Zhihao Zhang, Fei Xiao, Youwei Wang, Yanbin Jiang *. Mechanism of improving strength and damping properties of powder-extruded Al/Zn composite after diffusion annealing. Transactions of Nonferrous Metals Society of China, 2018,28(10):1928-1937 (通讯作者).

(22) Jin-bo Gu, Hua-qing Liu, Jing-yuan Li*, Yan-bin Jiang*, Rui-jin Chang. Effect of nitrogen on microstructure and secondary hardening of H21 die steel. J. Iron Steel Res. Int. 2019, doi.org/10.1007/s42243-018-0164-6(0123456789 (通讯作者).

(23) 姜雁斌, 刘新华, 王春阳, 莫永达, 谢建新. 感应加热连续退火对铜包铝复合线材再结晶组织和界面金属间化合物的影响.金属学报, 2014, 50(4):479-488.

(24) Yanbin Jiang, Lei Guan, and Guoyi Tang. Microstructure and Mechanical Properties of Cold-rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment. Materials Science Forum, 2014, 789: 328-335.

(25) Yanbin Jiang, Zhihao Zhang, Lei Guan, and Guoyi Tang. Recrystallization and Precipitation of β-Mg17Al12 Phase of theCold-rolled Mg-9Al-1Zn Alloy Strip during Isothermal Annealing. Materials Science Forum, 2014, 789: 336-343.

(26)姜雁斌，刘贤钙，张小军，谢建新. 冷型热阻角对HCCM 水平连铸BFe10-1-1 管材周向组织和力学性能均匀性的影响. 中国有色金属学报, 2014, 24(9):2322-2332.

(27)姜雁斌，官磊等. 电脉冲连续退火对AZ91 镁合金带材组织和性能的影响. 材料热处理学报，2015,36(3):135-141.

(28)姜雁斌，谢建新. Fe含量对CuNi10FeMn1合金组织性能的影响. 中国有色金属学报，2016, 26(8):1659-1667.

(29)姜雁斌，郭诗锦，谢建新. 金包铜复合微丝拉拔过程中组织性能变化. 中国有色金属学报，2017，27(9):1838-1847.

(30)姜雁斌，凌亮，谢建新. 制备参数对反向凝固黄铜包覆纯铜绞线复合材料表面质量和界面结合状态的影响. 中国有色金属学报，2018，28(4):693-704

(31) Chunyang Wang，Yanbin Jiang，Jianxin Xie etal. Effect of the steel sheet surface hardening state on interfacial bonding strength of embedded aluminum-steel composite sheet produced by cold roll bonding process. Materials Science and Engineering A, 2016, 652: 51-58.

(32) Yongda Mo, Yanbin Jiang, Xinhua Liu, Jianxin Xie. Effects of tensile loading direction on the mechanical properties and deformation behavior of columnar-grained HAl77-2 aluminum brass. Materials Science and Engineering A, 2016,670:122-131.

专利：

[1] 姜雁斌，谢建新。一种高性能金包铜键合微丝的制备方法，中国发明专利, ZL 201410461599.9，已授权，授权日：2016.08.17。

[2] 姜雁斌，刘新华，谢建新，毛晓东。一种大直径薄壁白铜管材短流程生产方法，中国发明专利，ZL 201510596464.8，已授权，授权日：2017.08.08。

[3] 姜雁斌，谢建新，郭诗锦。一种金包铜复合丝的制备方法，中国发明专利，ZL201610318397.8, 已授权，授权日：2018.06.05。

[4] 姜雁斌，谢建新，凌亮。一种金属包覆材料固液连铸复合成形设备与工艺，中国发明专利，ZL 201610486425.7，已授权，授权日：2018.06.05。

[5] 姜雁斌，谢建新，雷宇，李永帅。一种双金属铁路贯通地线及其短流程生产方法。中国发明专利，CN201810101477.7，申请日：2018.02.01。

[6] 谢建新，姜雁斌，刘琪。一种高强高导铜合金带材短流程生产方法，中国发明专利，CN201610663056.4申请日：2016.08.15

[7] 谢建新，姜雁斌，徐俊。一种高铁白铜合金管材及其短流程生产方法。中国发明专利，ZL201410653407.4，已授权，授权日：2016.08.17。