1987.09-1992.07 清华大学材料工程系金属材料及热处理专业就读大学本科 1992.09-1994.02 西南交通大学材料系金属材料专业攻读硕士学位 1994.03-1997.12 西南交通大学应用力学与工程系固体力学专业攻读博士学位

1997.12-2003.07 西南交通大学应用力学与工程系讲师、副教授 2003.07-2005.07 西南交通大学应用力学与工程系教授、系副主任 2005.07-2008.06 西南交通大学应用力学与工程系教授、博士生导师、系副主任 2008.07-2015.01 西南交通大学力学与工程学院教授、博士生导师、副院长、院长（2010） 2015.01-2018.9 西南交通大学牵引动力国家重点实验室主任、力学与工程学院院长 2018.09-至今 西南交通大学力学与工程学院院长 3)海外经历 2001.09-2002.09 日本名古屋大学微系统工程系, 访问学者合作研究 2008.11-2009.01 澳大利亚Monash大学机械与航空工程系访问教授 2009.10-2010.09 德国Bochum鲁尔大学连续统力学研究所“洪堡”高级研究员 2011.11-2011.11 香港科技大学机械系访问教授（7天） 2012.03-2012.09 德国Siegen大学土木系结构力学研究所“洪堡”高级研究员 2014.12-2014.12 新加坡南洋理工大学机械与航空系访问教授（7天）

形状记忆合金热-力耦合循环变形和疲劳失效行为的宏微观实验和理论研究，国家自然科学基金重点项目（11532010），2016~2020，主持 先进材料循环本构关系研究，国家杰出青年基金项目（11025210），2011~2014，主持 介电高弹体热-力-电耦合循环大变形行为的实验和理论研究，国家自然科学基金面上项目（11972312），2020-2023，主持 热塑性聚合物材料的湿-热-力耦合循环本构关系研究，国家自然科学基金面上项目（11272269），2013-2016，主持 基于微观机理的非比例多轴循环棘轮本构模型研究，国家自然科学基金面上项目（10772153），2008.1~ 2010.12，主持 考虑棘轮效应的非比例多轴应力疲劳失效模型研究，国家自然科学基金青年项目（10402037），2005.1~ 2007.12，主持 材料的疲劳、断裂与可靠性分析暑期讲习班，国家自然科学基金主任基金项目（11142002），2012.8~ 2012.10，主持 金属材料室、高温非比例循环载荷下的棘轮行为研究，国家自然科学基金面上项目（19772041）, 1998.1~2001.1，主研 颗粒增强金属基复合材料非比例多轴棘轮行为的本构模型研究，国家自然科学基金青年项目（10802069），2009.1~ 2011.12，主研 镍钛合金应力诱发相变下的微磨损机理研究，国家自然科学基金青年项目（50305029），2004.1~ 2006.12，主研 高速列车安全服役关键基础问题研究：多模式耦合复杂微动失效机制及防护，国家“973”计划项目课题4（2007CB714704），2007.9~2011.7，主研 高速列车动车组的寿命与可靠性设计技术研究，国家“863”计划项目（2006AA04Z406），2006.12~ 2008.12，主研 省部级项目 高速列车车轮滚动接触疲劳研究，四川省国际科技合作项目（2017HH0038），2017.1~2019.12，主持 高速列车技术中的基础力学问题研究，四川省青年科技创新团队支持项目（2013TD0004），2013.9~2016.9，主持 形状记忆合金的热-机械循环变形行为研究，教育部“新世纪优秀人才支持计划”项目（NCET05- 0796），2006.1~ 2008.12，主持 颗粒增强金属基复合材料非比例循环变形行为及其本构描述，霍英东教育基金会优秀青年教师基金项目（91007），2004.3~2007.3，主持 颗粒增强金属基复合材料室、高温非比例多轴棘轮行为研究，四川省杰出青年基金（05ZQ026- 028），2005.6~ 2008.6，主持 高速列车车轴弯曲微动疲劳失效机理研究，四川省杰出青年基金后续资助项目（2010JQ0022），2010~2012，主持 循环硬化材料高温非比例循环棘轮行为的本构描述及其有限元移植, 教育部留学回国人员科研启动基金项目，2003.12~2006.12，主持 循环硬化材料的非比例循环棘轮行为的本构描述及其有限元实现，四川省应用基础基金项目（03JY029-062-2），2003.9~2004.12，主持 短纤维增强金属基复合材料的界面失效及其数值模拟, 教育部材料损伤与破坏重点实验室开放基金项目, 1999.1~2000.7，第二主研 反应堆材料冷态断裂韧性研究，国防科委“093”项目子课题，1999.1~2000.1，主研 软土变形的有限元分析和本构模拟, 四川省科委重点项目子课题, 1999.1~2000.1，主研 短纤维增强金属基复合材料细观力学研究, 四川省应用基础研究基金项目, 1998.1~2000.1，主研 其他项目 关键零部件剩余寿命预测模型及车辆子系统评判方法研究，神华货车集团公司科技项目（SHGF-17-56-4），2018.6~2021.12，主持 高分子材料和高分子复合材料本构关系研究，国家重点实验室开放基金重点项目（2008TPL- Z03），2008.9~ 2011.12，主持 高速列车用铝合金材料的循环变形行为和疲劳问题研究，国家重点实验室自主课题项目（2011TPL-Z03），2010.9~ 2012.12，主持 高速列车技术中的关键力学问题研究，中央高校基本科研业务费专题项目（SWJTU09ZT35），2010~2014，主持 高温下时相关单轴循环棘轮行为的本构描述及其有限元实现，西南交通大学基础研究基金项目（XJ2003B15），2003.12~2005.12，主持 高温下短纤维增强金属基复合材料的界面微观结构和力学行为研究, 西南交通大学基础研究基金项目（XJ1999B16），1999.12~2001.12，主持

已在《International Journal of Plasticity》、《Journal of the Mechanics and Physics of Solids》、《Advanced Functional Materials》、《Acta Materialia》、《Mechanics of Materials》、《Applied Physics Letters》、《Composite Science and Technology》、《Composites A》、《International Journal of Non-Linear Mechanics》、《Materials Science & Engineering A》、《International Journal of Fatigue》、《Nuclear Engineering and Design》、《International Journal of Mechanical Science》、《Theoretical and Applied Fracture Mechanics》、《Communications in Numerical Methods in Engineering》、《Fatigue & Fracture of Engineering Materials and Structures》、《Journal of Material Science & Technology》、《Acta Mechanica Solida Sinica》、《力学学报》、《固体力学学报》、《工程力学》、《应用力学学报》、《核动力工程》、《复合材料学报》以及《金属学报》等期刊和国内外学术会议上发表论文300余篇，其中被SCI收录200余篇、被EI收录280余篇，被SCI他人引用2000余次，H指数=31，Google学术引用5200余次。 [217]Jianfeng Zhao, Xiaochong Lu, Fuping Yuan, Qianhua Kan, Shaoxing Qu, Guozheng Kang, Xu Zhang. Multiple mechanism based constitutive modeling of gradient nanograined material, International Journal of Plasticity, 2019, accepted. [216]Jian Li，Qianhua Kan, Kaijuan Chen, Zhihong Liang, Guozheng Kang. In situ observation on rate-dependent strain localization of thermo-induced shape memory polyurethane, Polymers, 2019,11,982. [215]Zhang Kuo, Kang Guozheng, Sun Qingping. High fatigue life and cooling efficiency of NiTi shape memory alloy under cyclic compression, Scripta Materialia, 2019, 159, 62-67. [214]Li Hang, Kang Guozheng, Yu Chao, Liu Yujie. Experimental investigation on temperature-dependent uniaxial cyclic deformation of AZ31B magnesium alloy, International Journal of Fatigue, 2019, 120, 33-45. [213]Wu Fa, Li Xiangyu, Zheng Ruifeng, Kang Guozheng. Theory of adhesive contact on multi-ferroic composite materials: Spherical indenter, International Journal of Engineering Science, 2019, 134, 77-116. [212]Lu Xiaochong, Zhang Xu, Shi Mingxing, Roters Franz, Kang Guozheng, Raabe Dierk. Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper, International Journal of Plasticity, 2019, 113, 52-73. [211]Zhao Jianfeng, Kan Qianhua, Zhou Liucheng, Kang Guozheng, Fan Haidong, Zhang Xu. Deformation mechanisms based constitutive modelling and strength-ductility mapping of gradient nano-grained materials, Materials Science and Engineering A, 2019, 742, 400-408. [210]Xie Qijun, Zhu Zhiwu, Kang Guozheng. Thermal activation based constitutive model for high-temperature dynamic deformation of AZ31B magnesium alloy, Materials Science and Engineering A, 2019, 743, 24-31. [209]Zhou Ting, Yu Chao, Kang Guozheng, Kan Qianhua. A microplane constitutive model for martensite transformation and reorientation in shape memory alloys under non-proportional multiaxial loading, International Journal of Mechanical Science, 2019, 152, 63-80. [208]Yuan Jianghong, Huang Yin, Chen Weiqiu, Pan Ernian, Kang Guozheng. Theory of dislocation loops in multilayered anisotropic solids with magneto-electro-elastic couplings, Journal of Mechanics and Physics of Solids, 2019, 125, 440-471. [207]Rao Wei, Zhang Juan, Kang Guozheng, Xie Xi, Jiang Han. Numerical study on toughening mechanism of bulk metallic glass composites from martensite transformation of toughening phase, Journal of Non-Crystalline Solids, 2019, 506, 88-97. [206]Xu Bo, Kang Guozheng, Kan Qianhua, Xie Xi, Yu Chao. Phase field simulation to one-way shape memory effect of NiTi shape memory alloy single crystal, Computational Materials Science, 2019, 161, 276-292. [205]Chen Kaijuan, Kang Guozheng, Yu Chao. Effect of crystalline content on ratchetting of ultra-high molecular weight polyethylene polymers: experimental investigation and constitutive model, Mechanics of Materials, 2019, 133, 37-54. [204]Rao Wei, Zhang Juan, Kang Guozheng, Yu Chao, Jiang Han. A meso-mechanical constitutive model for the bulk metallic glass composites with considering the local failure of matrix, International Journal of Plasticity, 2019, 115, 238-267. [203]Xie Xi, Kang Guozheng, Kan Qianhua, Yu Chao, Peng Qi. Phase field modeling to transformation induced plasticity in super-elastic NiTi shape memory alloy single crystal, Modelling and Simulation in Materials Science and Engineering, 2019, 27, 045001 (24 pages). [202]Wu Shengchuan, Song Zhe, Kang Guozheng, Yanan Hu, Yanan Fu. The Kitagawa-Takahashi diagram to hybrid welded AA7050 joints via synchrotron X-ray tomography, International Journal of Fatigue, 2019, 125, 201-221. [201]Yu Chao, Kang Guozheng, Sun Qingping, Fang Daining. Modelling the martensite reorientation and resulting zero/negative thermal expansion of shape memory alloys, Journal of Mechanics and Physics of Solids, 2019, 127, 295-331. [200]Yu Chao, Kang Guozheng, Fang Daining. Mean-field homogenization of elasto-viscoplastic composites based on a new mapping-tangent linearization approach, SCIENCE CHINA Technological Sciences, 2019, 62(5), 736-746. [199]Song Di, Kang Guozheng, Yu Chao, Kan Qianhua, Zhang Chuanzeng. Torsional whole-life transformation ratchetting under pure-torsional and non-proportional multiaxial cyclic loadings of NiTi SMA at human-body temperature: Experimental observations and life-prediction model, Journal of the Mechanical Behavior of Biomedical Materials, 2019, 94, 267–278. [198]Yu Chao, Kang Guozheng, Fang Daining. A micromechanical constitutive model for unusual temperature-dependent deformation of Mg-NiTi composites, International Journal of Solids and Structures, 2019, 170, 38-52. [197]Qiu Bo, Kan Qianhua, Yu Chao, Kang Guozheng, Yan Wenyi. A 3D thermo-mechanically coupled model for describing rate-dependent super-elastic degeneration of NiTi shape memory alloys, Mechanics Research Communications, 2019, 99, 32-41. [196]Li Yingxu, Kang Guozheng, Gao Yuanwen. A review of magneto-elastic interaction and its theoretical descriptions in type-II superconductors, Journal of Superconductivity and Novel Magnetism, 2019, 32(4), 797-803. [195]Qiu Bo, Kan Qianhua, Kang Guozheng, Yu Chao, Xie Xi. Rate-dependent transformation ratcheting-fatigue interaction of super-elastic NiTi alloy under uniaxial and torsional loadings: Experimental observation, International Journal of Fatigue, 2019, 127, 470-478. [194]Yu Chao, Kang Guozheng, Song Di, Xie Xi. A three-dimensional constitutive model for magneto-mechanical deformation of NiMnGa ferromagnetic shape memory alloy single crystals, Acta Mechanica Sinica, 2019, 35(3), 563-588. [193]Yang Bing, Duan Hao, Wu Shengchuan, Kang Guozheng. Damage tolerance assessment of a brake unit bracket for high-speed railway welded bogie frames, Chinese Journal of Mechanical Engineering, 2019, 32: 58 (11 pages). [192]Li Yingxu, Kang Guozheng, Gao Yuanwen. First-order pinning interaction in type-II superconductors with Ginzburg–Landau descriptions, The European Physical Journal B, 2019, 92, 107 (5 pages). [191]Wei Dean, Zaiser Michael, Feng Zhiqiang, Kang Guozheng, Fan Haidong, Zhang Xu. Effect of twin boundary orientation on the mechanical properties of bicrystalline copper micropillars, Acta Materialia, 2019, 176, 289-296. [190]Chen Yifu, Kang Guozheng, Yuan Jianghong, Li Tiefeng. Experimental study on pure-shear-like cyclic deformation of VHB 4910 dielectric elastomer, Journal of Polymer Research, 2019, 26, 186 (15 pages). [189]Shen Fei, Kang Guozheng, Lam Yee Cheong, Liu Yujie, Zhou Kun. Thermo-elastic-viscoplastic -damage model for self-heating and mechanical behavior of thermoplastic polymers, International Journal of Plasticity, 2019, 121, 227-243. [188]Luo Huiliang, Kang Guozheng, Kan Qianhua, Ma Chuanping. Experimental study on the whole-life heterogeneous ratchetting and fatigue life of SUS301L stainless steel butt-welded joint, Fatigue & Fracture of Engineering Materials & Structures, 2019, in press. [187]Zhao Tianxing, Kang Guozheng, Yu Chao, Kan Qianhua. Experimental investigation on the thermo-mechanical cyclic degeneration of one-way shape memory effect of NiTi shape memory alloy, International Journal of Minerals, Metallurgy and Materials, 2019, in press. [186]Chen Kaijuan, Zhang Lei, Kuang Xiao, Li Vincent, Lei Ming, Kang Guozheng, Wang Zhonglin, Qi Hang Jerry. Dynamic photomask-assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator, Advanced Functional Materials, 2019, in press. [185]Wang Bing, Kang Guozheng, Wu Wenping, Zhou Kun, Kan Qianhua, Chao Yu. Transformation ratchetting of nanocrystalline super-elastic NiTi shape memory alloy and its atomic mechanism from molecular dynamics simulations, International Journal of Plasticity, 2019, revised. [184]Li Hang, Kang Guozheng, Yu Chao. A crystal plasticity based constitutive model for uniaxial ratchetting of magnesium alloys considering dislocation slipping, twinning and detwinning mechanisms, Mechanics of Materials, 2019, revised. [183]Chen Yifu, Kang Guozheng, Yuan Jianghong, Li Tiefeng, Qu Shaoxing. Experimental investigation on electro-mechanically coupled cyclic deformation of laterally-constrained dielectric elastomer, Polymer Testing, 2019, revised. 2018年 [182]Wang Bing, Kang Guozheng, Kan Qianhua, Zhou Kun, Chao Yu. Atomistic study on the super-elasticity of single crystal bulk NiTi shape memory alloy under adiabatic condition, Computational Materials Science, 2018, 142, 38-46. [181]Xie Xi, Kang Guozheng, Kan Qianhua, Yu Chao, Peng Qi. Phase field modeling for cyclic transformation of super-elastic NiTi shape memory single crystal, Computational Materials Science, 2018, 143, 212-224. [180]Zhang Jianwei, Jiang Han, Jiang Chengkai, Kang Guozheng, Kan Qianhua, Li Yonghua. Experimental and numerical investigations of evaluation criteria and material parameters' coupling effect on polypropylene scratch, Polymer Engineering & Science, 2018, 58 (1), 118-122. [179]Rao Wei, Zhang Juan, Kang Guozheng, Liaw Peter K. Numerical simulation on the evolution of shear bands in bulk metallic glass composites under tension and compression, Composites Structures, 2018, 187, 411-428. [178]Wu Fa, Li Xiangyu, Chen Weiqiu, Kang Guozheng, Müller R. Indentation on a transversely isotropic half-space of multiferroic composite medium with a circular contact region, International Journal of Engineering Science, 2018, 123, 236-289. [177]Li Peidong, Li Xiangyu, Kang Guozheng. Axisymmetric thermo-elastic field in an infinite one-dimensional hexagonal quasi-crystal space containing a penny-shaped crack under anti-symmetric heat fluxes, Engineering Fracture Mechanics, 2018, 190, 74-92. [176]Yu Chao, Kang Guozheng, Kan Qianhua, Sun Qingping. A constitutive model for grain size dependent deformation of NiTi polycrystalline shape memory alloys, International Journal of Mechanical Science, 2018, 138-139, 34-41. [175]Kuang Xiao, Zhao Zeang, Chen Kaijuan, Fang Daining, Kang Guozheng, Qi H. Jerry. High-speed 3D printing of high-performance thermosetting polymers via two-stage curing, Macromolecular Rapid Communications, 2018, 1700809 (8pp). [174]Yu Chao, Kang Guozheng, Kan Qianhua. A micromechanical constitutive model for grain size dependent thermo-mechanically coupled inelastic deformation of super-elastic NiTi shape memory alloy, International Journal of Plasticity, 2018, 105, 99-127. [173]Chen Kaijuan, Kuang Xiao, Lic Vincent, Kang Guozheng, Qi H. Jerry. Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing, Soft Matter, 2018, 14, 1879-1886. [172]Chen Yifu, Kang Guozheng, Yuan Jianghong, Yu Chao. Uniaxial ratchetting of filled rubber: experiments and damage-coupled hyper-viscoelastic-plastic constitutive model, Journal of Applied Mechanics ASME, 2018, 85(6), 061013 (9 pages). [171]Wang Bing, Kang Guozheng, Kan Qianhua, Wu Wenping, Zhou Kun, Chao Yu. Atomistic study on the super-elasticity of nanocrystalline NiTi shape memory alloy subjected to a cyclic deformation, Computational Materials Science, 2018, 152, 85-92. [170]Miao Hongchen, Huan Qiang, Li Faxin, Kang Guozheng. A variable-frequency bidirectional shear horizontal (SH) wave transducer based on dual face-shear (d24) piezoelectric wafers, Ultrasonics, 2018, 89, 13-21. [169]Li Jian, Kan Qianhua, Zhang Zebin, Kang Guozheng, Yan Wenyi. Thermo-mechanically coupled thermo-elasto-visco-plastic modeling of thermo-induced shape memory polyurethane at finite deformation, Acta Mechanica Solida Sinica, 2018, 31(2), 141-160. [168]Xu Xiang, Xu Bo, Jiang Han M., Kang Guozheng, Kan Qianhua. A multi-mechanism model describing reorientation and reorientation-induced plasticity of NiTi shape memory alloy, Acta Mechanica Solida Sinica, 2018, 31(4), 445-458. [167]Yang Jingye, Kang Guozheng, Chen Kaijuan, Kan Qianhua. Experimental study on uniaxial ratchetting-fatigue interaction of polyamide-6, Polymer Testing, 2018, 69, 545-555. [166]Rao Wei, Zhang Juan, Kang Guozheng. A failure mechanism based constitutive model for bulk metallic glass, Mechanics of Materials, 2018, 125, 52-69. [165]Yu Chao, Kang Guozheng, Xi Xie, Wei Rao. A micromechanical model for the grain size dependent super-elasticity degeneration of NiTi shape memory alloys, Mechanics of Materials, 2018, 125, 35-51.

发明专利： 阚前华，徐祥，康国政，卢福聪，方涛。一种形状记忆合金奥氏体和马氏体相弹性模量的纳米压痕测试方法，发明专利(ZL 201510856957.0)，2018.03.16. 卢福聪，康国政，刘宇杰，阚前华，徐祥，陈开卷，赵天行。一种聚合物材料室高温多轴循环试验装置。发明专利(Zl 2015 11031128.5)，2018.01.05. 卢福聪, 康国政, 张建伟, 蒋晗, 刘宇杰. 一种基于杠杆原理的多功能材料试验夹具, 发明专利（ZL 2014 1 0004988.9）, 2015.12.13.ࣺᯬ