1999.09-2004.07 清华大学/Tsinghua University 工程力学专业 学士/Bachelor

2004.09-2005.12 清华大学/Tsinghua University 固体力学专业 硕士/Master

2005.12-2009.07 清华大学/Tsinghua University 固体力学专业 博士/Ph.D.

2009.08-2011.07，美国俄亥俄州立大学/Ohio State University，纳米科技中心，博士后/Postdoc 2011.08-2014.03，加拿大多伦多大学/University of Toronto，机械工程系，博士后/Postdoc 2015.08-2015.10，美国休斯敦大学/University of Houston，机械工程系，访问学者/Visiting Scholar 2014.04至今，同济大学/Tongji University，航空航天与力学学院，副教授/Associate Professor

1. 广义喷丸法生成的梯度纳晶金属的断裂行为的建模与模拟研究，国家自然科学基金面上项目，11772231，2018/01-2021/12。

2. 聚合物充填处理的电路板在热力载荷下的失效研究，国家自然科学基金青年科学基金项目，11402173，2015/01-2017/12。

3. 喷丸表面处理有效性和可靠性的机理研究，上海市教委科研创新项目，15zz018， 2015/01-2016/12。

4. 同济大学英才计划优青项目，20143401,2014/09-2016/08。

1.Fan Yang, Hualin Fan, Shaker A. Meguid, “Analytical, Numerical and Experimental Studies of the Effect of Foam-Filling on Collapse Mode Transition of Thin-Walled Circular Columns Under Axial Compression”, International Journal of Mechanical Science, submitted.

2.Fan Yang, Minglu Wang, Mohamed Hassan, Shaker A. Meguid, A. M. S. Hamouda, “Effect of interfacial friction and fold penetration on the progressive collapse of foam-filled frustum using kinematically admissible model”, International Journal of Crashworthiness, 2018. DOI: 10.1080/13588265.2018.1489337.

3.Fan Yang, Shaker A. Meguid, A. M. S. Hamouda, “Kinematically admissible folding mechanisms: for the progressive collapse of foam filled conical frusta”, International Journal of Mechanics and Materials in Design, Vol. 14, pp. 105–126, 2018.

4.H Fan, Y Luo, Fan Yang, W Li, “Approaching perfect energy absorption through structural hierarchy”, International Journal of Engineering Science, Vol. 130, pp. 12-32, 2018.

5.杨帆, 刘亚平, 聚合物整体灌装电路板热应力分析, 电子器件, Vol. 41(6), 2018.

6.刘亚平, 杨帆, 基于细观力学方法的底部充填封装芯片接合层的热应力计算, 力学季刊, Vol. 39(1), pp. 39-48, 2018.

7.Zhe Li, Fan Yang, “Grain rotations during uniaxial deformation of gradient nano-grained metals using crystal plasticity finite element simulations”, Extreme Mechanics Letters, Vol. 16, pp. 41–48, 2017.

8.Jianhua Tong, Fan Yang, Xin Li, X Xu, GX Wang, “Mechanical Characterization and Material Modeling of Diabetic Aortas in a Rabbit Model”, Annals of Biomedical Engineering, Vol. 46, pp. 1-14, 2017.

9.Fan Yang, Yukui Gao, “Predicting the peen forming effectiveness of Ti-6Al-4V strips with different thicknesses using realistic finite element simulations. Journal of Engineering Materials and Technology”, Vol. 138(1), pp. 011004, 2016.

10.SA Meguid, F Yang, P Hou, “Crush behaviour of foam-filled thin-walled conical frusta: analytical, numerical and experimental studies”, Acta Mechanica, Vol. 227(12), pp. 3391-3406, 2016.

11.黄河, 杨帆, 高玉魁, 喷丸除锈过程及效果的数值模拟研究表面技术, Vol. 45(11): 194-201, 2016.

12.Fan Yang, Zheng Zhong, “On the energy conservation during the active deformation in molecular dynamics simulations”, Journal of Mechanics and Physics in Solids, Vol. 77, pp. 146-157, 2015.

13.Fan Yang, Zhuo Chen, Shaker A. Meguid, “Effect of initial surface finish on effectiveness of shot peening treatment using enhanced periodic cell model”, International Journal of Mechanics and Materials in Design, Vol. 11(4), pp. 463-478, 2015.

14.SA Meguid, F Yang, P Verberne, “Progressive collapse of foam-filled conical frustum using kinematically admissible mechanism”, International Journal of Impact Engineering, Vol. 82, pp. 25-35, 2015.

15.Z Chen, F Yang, SA Meguid, “Multi-level modeling of woven glass/epoxy composite for multilayer printed circuit board applications”, International Journal of Solids and Structures, Vol. 51(21-22), pp. 3679-3688, 2014.

16.Z Chen, F Yang, SA Meguid, “Realistic finite element simulations of arc-height development in shot-peened Almen strips”, ASME Journal of Engineering Materials and Technology, Vol. 136(4), pp. 041002, 2014.

17.SA Meguid, Z Chen, F Yang, “Effective mitigation of shock loads in embedded electronic packaging using bilayered potting materials”, ASME Journal of Electronic Packaging, Vol. 136(4), pp. 041005, 2014.

18.Fan Yang, Zhuo Chen, Shaker A. Meguid, “3D FE modeling of oblique shot peening using a new periodic cell”, International Journal of Mechanics and Materials in Design, Vol. 10(2), pp. 133-144, 2013,

19.Fan Yang, Shaker A. Meguid, “Efficient multi-level modeling technique for determining effective board drop reliability of PCB assembly”, Microelectronics Reliability, Vol. 53(7), pp. 975-984, 2013,

20.Na Zhang#, Fan Yang#, Changyu Shen, Jose Castro, James L. Lee, “Particle erosion on carbon nanofiber paper coated carbon fiber/epoxy composites”, Composites part B, Vol. 54, pp. 209-214, 2013.

21.Na Zhang#, Fan Yang#, Dante Guerra, Changyu Shen, Jose Castro, James L. Lee, “Enhancing particle erosion resistance of glass-reinforced polymeric composites using carbon nanofiber-based nanopaper coatings”, Journal of Applied Polymer Science, Vol. 129(4), pp. 1875-1881, 2013.

22.Na Zhang#, Fan Yang#, Lei Li, Changyu Shen, Jose Castro, James L. Lee, “Thickness effect on particle erosion resistance of thermoplastic polyurethane coating on steel substrate”, Wear, Vol. 303(1-2), pp. 49-55, 2013,

23.Fan Yang, Somnath Ghosh, James L. Lee, “Molecular dynamics based size and rate dependent constitutive model of polystyrene thin films”, Computational Mechanics, Vol. 50(2), pp. 169-184, 2012.

24.Fan Yang, Wei Yang, “Crack growth versus blunting in nanocrystalline metals with extremely small grain size”, Journal of Mechanics and Physics in Solids, Vol. 57(2), pp. 305-324, 2009.

25.Fan Yang, Wei Yang, “Kinetics and size effect of grain rotations in nanocrystals with rounded triple junctions”, Scripta Materialia, Vol. 61(9), pp. 919-922, 2009.

26.Fan Yang, Wei Yang, “Brittle versus ductile transition of nanocrystalline metals”, International Journal of Solids and Structures, Vol. 45(13), pp. 3897-3907, 2008.

27.Xiangming Zhang, Nianke Ma, Fan Yang, Zhenhai Li, Wei Yang, “Experimental measurements of the biomechanical properties of cardiac tissues”, Journal of Tsinghua University (Science and Technology), Vol. 46(11):1941-1948, 2006.

28.杨帆, 杨卫, 从苍蝇与物面的触粘看尺度效应力学与实践, 04, pp. 12-14, 2004.

1.杨帆，童建华，刘亚平， 李哲, 一种多管组合式缓冲防撞装置, 发明专利, 201711268893.8

2.杨帆，李哲，刘亚平, 统计模拟过程中体积去除量的有限元后处理软件V1.0, 软件著作权，软著登字1623944号, 2017.02.10

3.杨帆，李哲，刘亚平, 统计界面损失比率的有限元后处理软件V1.0, 软件著作权，软著登字1623528号, 2017.02.10

4.杨帆，统计ABAQUS结果场变量沿指定方向分布的平均值和标准方差软件，软件著作权，软著登字1340875号, 2016.06.30

5.杨帆，基于变形过程中能量守恒原理对LAMMPS源代码的修正软件，软件著作权，软著登字1340878号, 2016.06.30

6.杨帆，无定形态聚苯乙烯高分子模拟构型生成软件，软件著作权，软著登字1340880号, 2016.06.30

7.杨帆，高玉魁，黄河，统计指定表面粗糙度的有限元后处理软件，软件著作权，软著登字1233965号, 2016.03.16

8.杨帆，高玉魁，黄河，指定线、面或体积区域灵活提取结果场变量的有限元后处理软件，软件著作权，软著登字1234596号, 2016.03.17

9.杨帆，李哲，分子动力学系统的分层均方位移和平均位移计算软件，软件著作权，软著登字1235342号, 2016.03.17