1. Zhen Zhang*, Pavel Cizek, Matthew Barnett, Scripta Materials, 67 (2012) 1015–1018. A critical test of twin induced softening in a magnesium alloy extruded to a strain of 0.7 at room temperature. 2. Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu, The effect of texture and grain size on improving the mechanical properties of Mg-Al-Zn alloys by friction stir processing, Scientific reports, (2018) 8:4196 | DOI:10.1038/s41598-018-22344-3 3. Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu, A special band structure perpendicular to the basal planes formed in a magnesium alloy during hot-rolling process, Materials Science & Engineering A 703 (2017) 244–250 4. Jinhua Peng, Zhen Zhang*, Yaozu Li, Wei Zhou, Yucheng Wu, Twinning-induced dynamic recrystallization and micro-plastic mechanism during hot-rolling process of a magnesium alloy，Materials Science & Engineering A 699 (2017) 99–105 5. Jinhua Peng, Zhen Zhang*, Pengju Yang, Peng Guo, Yaozu Li, Wei Zhou, Yucheng Wu,,The effect of continuous confined strip shearing deformation on the mechanical properties of AZ31 magnesium alloys, Materials Science & Engineering A 743(2018) 397-403 6. Zhen Zhang*, Materials Science Engineering A, 2013(527): 6467–6473, Twinning and its related work hardening during the ambient extrusion of a magnesium alloy. 7. Zhen Zhang*, Mingpu-Wang, Materials Science Engineering A 2010(527): 6467–6473, Orientation analyses for twinning behavior in small-strain hot-rolling process of twin-roll cast AZ31B sheet. 8. Zhen Zhang*, Mingpu-wang, Journal of Alloys and Compounds 2012(512): 73-78, Formation of shearing bands in the hot-rolling process of AZ31 alloy 9. Zhen Zhang*, Mingpu-wang , Journal of Alloys and Compounds 2012(544): 159-165, Preferential dynamic recrystallization at original grain boundaries in the hot-rolling process of AZ31 alloy. 10. Zhen Zhang*, Mingpu-wang, Journal of Alloys and Compounds 2011(509): 5571–5580, Twinning, dynamic recovery and recrystallization in the hot rolling process of win-roll cast AZ31B alloy. 11. Jinhua Peng, Zhen Zhang*, Peng Guo, Zhao Liu, Yaozu Li, Wei Zhou, Yucheng Wu,The effect of surface mechanical attrition treatment on texture evolution and mechanical properties of AZ31 magnesium alloy, Materials Characterization 2019(149) 12. Zhen Zhang*, Mingpu-wang, Materials Characterization 2011(62): 647-650, A method based on Euler space for twinning analyses in magnesium alloy, 13. Zhou Shi-ang, Zhen Zhang*, PAN De-jiang, SU Hai-ning, WU Yu-cheng*, Materials Characterization, 2016(118):85-91, Correlative characterization of primary particles formed in as-cast Al-Mg alloy containing a high level of Sc. 14.Zhen Zhang*, The formation of double peaks in the basal texture during ambient extrusion of an AZ31 magnesium alloy，Materials Letters 2014(116):131–134 15. Zhen Zhang*, Twinning related plastic mechanism of a magnesium alloy at a high strain stage of ambient sheath extrusion, Materials Letters, 2014(119):79-83, 16. Zhen Zhang*, Edgar Rauch, Muriel Veron, Materials Letters 2013(111):192-196, Twinning analyses in a magnesium alloy with tilting series scanning method using a TEM based orientation mapping system. 17. Zhou Shi-ang, Zhen Zhang* PAN De-jiang, SU Hai-ning, WU Yu-cheng*, Materials Letters, 2016(164):19–22, Formation of the eutecticum with multilayer structure during solidification in as-cast Al-Mg alloy containing a high level of Sc. 18. Zhou Shi-ang, Zhen Zhang*, PAN De-jiang, SU Hai-ning, WU Yu-cheng*, Materials and Design, 2016(90):1077-1084, Effect of Sc on microstructures and mechanical properties of as-cast Al-Mg alloys, 19. Heng Li , Zhao Liu , Zhen Zhang*, Jinhua Penga , Yaozu Li, Peng Guo , Yucheng Wu, International Journal of Materials Research,109 (2018) ; 1 – 7, The influence of twinning on plastic constitutive description of a magnesium alloy 20. Zhen Zhang*, Edgar F. Rauch and Muriel Véron, TEM based micro-texture measurement for twinning in a hot-rolled magnesium alloy with Astar System, Microscopy & Microanalysis 2013(Conference), Indianapolis, Indiana, U.S.A 21. M. Véron*, Z. Zhang, E.F. Rauch, Automated phase detection resolution using TEM spot diffraction patterns, Microscopy & Microanalysis 2013(Conference), Indianapolis, Indiana, U.S.A 22. Dejiang Pan, Shi’ang Zhou*, Zhen Zhang, Ming Li, Yucheng Wu*，Effects of Sc(Zr) on microstructure and mechanical properties of as-cast Al-Mg alloys,Material Science and Technology，Materials Science and Technology, 2017, 33(6): 751-757. 23. Dejiang Pan, Shi’ang Zhou, Zhen Zhang, Ming Li, Heng Li, Yucheng Wu*，Practical Metallography，Morphologies and growth mechanisms of the eutectic particles in as-cast Al-Mg-Sc alloy, Practical Metallography, 2017, 54(4): 241-255. 24. Yukun Li, Xiaodong Du*, Ya Zhang, Zhen Zhang, Junwei Fu, Shiang Zhou, Yucheng Wu*, The effect of scandium addition and T6 heat treatment on the microstructure and mechanical properties of Al-Si-Mg-Cu-Zr alloys, Applied Physics A,(Accepted). 25. Yukun Li, Xiaodong Du*, Ya Zhang, Zhen Zhang, Junwei Fu, Shiang Zhou, Yucheng Wu*, Microstructure and mechanical properties of Al-Si-Mg-Cu-Ti alloy with trace amounts of Sc, Materials Science and Technology, (Accepted). 26. 张真，陆冰沪，夏承东*，张睿，陈畅，汪明朴，时效状态对Cu-Cr-Zr系合金性能的影响, 有色金属材料与工程，2017:38(2):67-72 27. 张辉，彭金华，张真*，钟志宏，郑玉春、吴玉程，AZ31镁合金压缩孪晶对组织及性能的影响，金属热处理，2017，42(3)：124-128 28. 张真, 汪明朴*, 中国有色金属学报, 热轧过程中AZ31B合金的组织和织构演变2010 (20):1447-1454 29. 郭明星, 张真,陈畅，矿冶工程，2009(01):不同厚度Ta-2.5 wt%W合金箔材退火行为的研究 30. 李树梅, 汪明朴, 张真, 李周. 中国有色金属学报, AZ31B 镁合金的低温压缩变形机制, 2010(20):1254-1259 31. 郭明星, 汪明朴, 张真,陈畅, 申坤, 稀有金属材料与工程 2008(3): 过程参数对双束熔体原位复合法制备的Cu-TiB2合金组织结构的影响 32. 郭明星, 汪明朴, 申坤, 张真, 李树梅, 中国有色金属学，2007(17):1440-1446双束熔体原位复合法制备Cu-TiB2合金的热力学与动力学, 授权发明专利： 1. 一种全铝合金架空导线及其制备方法, 2016.11.10, 中国, CN201611102255.4 2.一种新型大载流耐热铝合金导线及其制备方法, 2016.10.8, 中国, CN201611102720.4 3.一种高强度耐腐蚀稀土铝合金材料及制备方法, 2016.12.5, 中国, 201611102414.0
|
