1、高温轻量刚玉材料烧结的原位应力与超塑性关系及其微纳米封闭气孔形成机理研究，国家自然科学基金面上项目，51474165，2015.01-2018.12，80万，主持，在研

2、等离子体垃圾焚烧条件下CA₆-SiC复合材料烧结机理与服役行为，国家自然科学基金面上项目，51772222，2018.01-2021.12，62万，主持，在研

3、低导热、长寿命新型隔热耐火材料的研发与应用示范，“十三五”国家重点研发计划子课题，2017YFB0310701，2017.01-2022.12，58万，参与，在研

4、超纯净钢冶炼用中间包关键耐火材料开发，国家“十五”科技攻关计划引导项目，2005BA325C，2005.01-2006.12，60万，主持，已结题

5、耐火材料与熔渣能质交换多场耦合数值模拟与控制研究，湖北省自然科学基金重点项目，2011.01-2013.12，20万，主持，已结题

6、轻量型精炼钢包铝镁系浇注料的研制开发，河南省科技创新杰出人才计划项目，134200510007，2012.01-2014.12，50万，主持，已结题

7、高性能耐火材料结构微细化设计研究，国家“973”计划预研子项，2012CB722702，2012.01-2014.12，280万，参与，已结题

8、新型材料结构与性能研究—天然镁橄榄石制备高性能耐火材料基础研究，国家“973”计划预研子项，2009CB626600，2009.01-2011.12，75万，参与，已结题

9、玻璃窑用高性能耐火材料技术—低维隔热耐火材料，国家“863”计划重点项目子课题，2009AA032503，2009.01-2011.12，200万，参与，已结题

10、基于多场耦合的精炼钢包轻量化耐火材料渣蚀行为研究，国家自然科学基金青年项目，51204126，2013.01-2015.12，25万，参与，已结题

在国内外重要刊物和学术会议上发表论文130余篇，近五年代表性论文如下

1. Fu   LP, Gu HZ*, Huang A, et al. Slag   resistance mechanism of lightweight microporous corundum aggregate. Journal   of the American Ceramic Society, 2015, 98 (5): 1658-1663.

2. Zou Y, Gu HZ*, Huang A.   Slag corrosion mechanism of lightweight Al₂O₃–MgO   castable in different atmospheric conditions. Journal of the American Ceramic   Society, 2018, 101(5): 2096-2106.

3. Chen D, Gu HZ, Huang A, et   al. Incorporating Zr combined Si and C to achieve self-repairing ability and   enhancement of silica sol bonded SiC castables. Journal of Alloys and   Compounds, 2018, 732: 396-405.

4. Fu LP, Gu HZ, Huang A, et   al. Correlations among processing parameters and porosity of a lightweight   alumina. Ceramics International, 2018, 44(12): 14076-14081.

5. Chen D, Gu HZ, Huang A, et   al. Incorporating Zr to achieve self-protecting and enhancement of silica sol   bonded SiC castables at active oxidation condition. Ceramics International,   2018, 44(6): 6089-6095.

6.   Fu LP, Gu HZ*, Huang A, et al.   Possible improvements of alumina-magnesia castable by lightweight microporous   aggregates. Ceramics International, 2015, 41 (1): 1263-1270.

7.   Fu LP, Gu HZ*, Huang A, et al. Effect   of MgO micropowder on sintering properties and microstructures of microporous   corundum aggregates. Ceramics International, 2015, 41 (4): 5857-5862.

8.   Zou Y, Gu HZ*, Huang A, et al. Effects   of aggregate microstructure on slag resistance of lightweight Al₂O₃-MgO   castable. Ceramics International, 2017, 43(18): 16495–16501.

9.   Zou Y, Gu HZ*, Huang A, et al. An   approach for matrix densification based on particle packing and its effect on   lightweight Al₂O₃-MgO castables,Ceramics International,   2016, 42(16): 18560–18567.

10.   Zou Y, Gu HZ*, Huang A, et al. Effects   of particle distribution of matrix on microstructure and slag resistance of   lightweight Al₂O₃-MgO castables. Ceramics   International, 2016, 42(1): 1964-1972.

11.   Zou Y, Gu HZ*, Huang A, et al.   Effects of MgO micropowder on microstructure and resistance coefficient of Al₂O₃-MgO   castable matrix. Ceramics International, 2014, 40(5):7023-7028.

12.   Chen D, Gu HZ*, Huang A, et al.   Mechanical strength and thermal conductivity of modified expanded vermiculite/forsterite   composite materials. Journal of Materials Engineering & Performance,   2016, 25(1):15-19.

13.   Chen D, Gu HZ, Huang A, et al.   Enhancement of bonding network for silica sol bonded SiC castables by   reactive micropowder. Ceramics International, 2017, 43(12):8850-8857.

14.   Chen D, Gu HZ*, Huang A, et al.   Towards chrome-free of high-temperature solid waste gasifier through in-situ   SiC whisker enhanced silica sol bonded SiC castable. Ceramics International,   2017, 43(3): 3330-3338.

15.   Zhou F, Gu HZ*, Wang CF, et al.   Preparation and microstructure of in-situ gel modified expanded vermiculite.   Ceramics International, 2013, 39(4): 4075-4079.

16.   Huang A, Gu HZ, Zhang MJ, et al.   Mathematical modeling on erosion characteristics of refining ladle lining   with application of purging plug.Metallurgical and Materials Transactions B,   2013, 44:744-749.

17. Zhang LX, Gu HZ, Sun HB,   et al. Molecular level one-step activation of agar to activated carbon for   high performance supercapacitors. Carbon, 2018, 132: 573-579.

18. Sun HB, Gu HZ, Zhang LX,   et al. Redox deposition of birnessite MnO₂ on ZIF-8 derived porous   carbon at room temperature for supercapacitor electrodes. Materials Letters,   2018, 216: 123-126.

19.   Fu LP, Huang A,Gu HZ, et al. Properties   and microstructures of lightweight alumina containing different types of   nano-alumina. Ceramics International, 2018, 44(15): 17885-17894.

20.   Fu LP, Huang A,Gu HZ, et al. Fabrication   of lightweight alumina containing fine closed pores by controlling the relationship   between phase stress and superplasticity: Experimental and mathematical   studies. Ceramics International, 2018, 44(16): 20034-20042.

21.   Lian PF,Huang A,Gu HZ, et al. Towards   prediction of local corrosion on alumina refractories driven byMarangoni convection.   Ceramics International, 2018, 44(2): 1675-1680.

22.   Fu LP, Huang A,Gu HZ, et al. Effect   of nano-alumina sol on the sintering properties and microstructure of   microporous corundum. Materials & Design, 2016, 89: 21-26.

23.   Fu LP, Huang A,Gu HZ*, et al. Fabrication   and characterization of lightweight microporous alumina with guaranteed slag   resistance. Ceramics International, 2016, 42(7): 8724-8728.

24.   Fu LP, Huang A,Gu HZ, et al. Improvement   of durability of purging plugs using MgO micropowder for refining ladles.   International Journal of Applied Ceramic Technology, 2016, 13(6): 1104-1111.

25.   Huang A, Fu LP, Gu HZ, et al. Towards   slag-resistance, anti-clogging and chrome-free castable for gas purging.   Ceramics International, 2014, 42(16): 18674-18680.

26.Chen   D, Huang A,Gu HZ, et al. Corrosion   of Al₂O₃–Cr₂O₃refractory lining   for high-temperature solid waste incinerator. Ceramics International, 2015,   41(10):14748-14753.