2004/09-2008/07，哈尔滨工业大学材料学院-中科院金属研究所，博士 2002/09-2004/07，哈尔滨工业大学材料学院，硕士 1998/09-2002/07，哈尔滨工业大学材料学院，学士

2019/01-现在，东北大学 轧制技术及连轧自动化国家重点实验室，教授，博士生导师 2012/01-现在，东北大学 轧制技术及连轧自动化国家重点实验室，副教授 2008/07-2011/12，东北大学 轧制技术及连轧自动化国家重点实验室，讲师

主要纵向项目： [1] 国家自然科学基金面上项目，搅拌摩擦焊高强管线钢环缝的复相组织演化与增韧机制研究，2018/01-2021/12，主持 [2] 国家十三五重点研发计划项目低温严苛腐蚀条件下低成本容器用钢开发与应用容器板的轧制复合原理与关键技术课题，2017/07-2021/06，参与 [3] 国家十三五重点研发计划项目扁平材全流程智能化制备关键技术的不锈钢复合卷的制备开发研究子课题，2017/07-2021/06，参与 [4] 国家十三五重点研发计划项目高强度大规格易焊接海洋工程用钢及应用ᠦ୔

代表性学术论文： 1. G.M. Xie, R.H. Duan, P. Xue, Z.Y. Ma, Z.A. Luo, Effect of cooling condition on microstructure and mechanical properties of friction stir welded pipeline steel, Acta Metallurgica Sinica (English Letters), 2019. 2. 谢广明，马宗义，薛鹏，骆宗安，王国栋，工具转速对搅拌摩擦加工Mg-Zn-Y-Zr耐热镁合金超塑性行为的影响，金属学报，12（2018）1745-1755. 3. G.M. Xie*, H.B. Cui, Z.A. Luo, R.D.K. Misra, G.D. Wang, Asymmetric distribution of microstructure and impact toughness in stir zone during friction stir processed a high strength pipeline steel, Mater. Sci. Eng. A, 704 (2017) 401-411. 4. G.M. Xie*, H.B. Cui, Z.A. Luo, R.D.K. Misra, G.D. Wang, Microstructural evolution and mechanical properties of the stir zone during friction stir processing a lean duplex stainless steel, Mater. Sci. Eng. A, 704 (2017) 31-321. 5. H.B. Cui, G.M. Xie*, Z.A. Luo, J. Ma, G.D. Wang, R.D.K. Misra, Microstructural evolution and mechanical properties of the stir zone in friction stir processed AISI201 stainless steel, Mater. Design, 106 (2016) 463-475. 6. H.B. Cui, G.M. Xie*, Z.A. Luo, J. Ma, G.D. Wang, R.D.K. Misra, The microstructural evolution and impact toughness of nugget zone in friction stir welded X100 pipeline steel, J. Alloys Compd., 681 (2016) 426-433. 7. G.M. Xie*, H.B. Cui, Z.A. Luo, W. Yu, J. Ma, G.D. Wang, Effect of rotation rate on Microstructural characteristic and mechanical properties of friction stir spot welded DP780 steel, J. Mater. Sci. Technol., 32 (2016) 326-332. 8. Z.A. Luo, G.M. Xie*, Z.Y. Ma, G.L. Wang, G.D. Wang, effect o f yttrium addition on microstructural characteristics and superplastic behavior of friction stir processed ZK60 alloy, J. Mater. Sci. Technol., 29 (2013) 1116-1122. 9. G.M. Xie*, Z.A. Luo, Z.Y. Ma, P. Xue, G.D. Wang, Superplastic behavior of friction stir processed ZK60 magnesium alloy, Mater. Trans. 52 (2011) 2278-2281. 10. G.M. Xie*, Z.Y. Ma, Z.A. Luo, P. Xue, G.D. Wang, Effect of rotation rate on Microstructures and mechanical properties of FSW Mg-Zn-Y-Zr alloy joints, J. Mater. Sci. Technol., 12 (2011) 1157-1164. 11. G.M. Xie*, Z.A. Luo, G.L. Wang, L. Li, G.D. Wang，Interface characteristic and properties of stainless steel /HSLA steel clad plate by vacuum rolling cladding, Mater. Trans. 52, (2011), 1709-1712. 12. G.M. Xie, Z.Y. Ma, L. Geng, Effect of Y addition microstructure and mechanical properties of friction stir welded ZK60 alloy, J. Mater. Sci. Technol. 25, 3 (2009) 351-355. 13. G.M. Xie, Z.Y. Ma, L. Geng, Partial recrystallization in the nugget zone of friction stir welded dual-phase Cu-Zn alloy, Philos. Mag. 89, 18 (2009) 1505-1516. 14. G.M. Xie, Z.Y. Ma, L. Geng, R.S. Chen, Microstructural evolution and enhanced superplasticity in friction stir processed Mg-Zn-Y-Zr alloy, J. Mater. Res. 23, 5 (2008) 1207-1213. 15. G.M. Xie, Z.Y. Ma, L. Geng, Microstructural evolution on mechanical properties of friction stir welded ZK60 alloy, Mater. Sci. Eng. A 486 (2008) 49-55. 16. G.M. Xie, Z.Y. Ma, L. Geng, R.S. Chen, Microstructural evolution and mechanical properties of friction stir welded Mg-Zn-Y-Zr alloy, Mater. Sci. Eng. A 471 (2007) 63-68. 17. G.M. Xie, Z.Y. Ma, L. Geng, Effect of rotation rate on microstructures and mechanical properties of brass joints, Mater. Trans. 49 (2008) 1698-1701. 18. G.M. Xie, Z.Y. Ma, L. Geng, Development of fine-grained microstructure and properties of nugget zone in friction stir welded pure copper, Scripta Mater. 57 (2007) 73-76. 19. Z.A. Luo, G.L. Wang, G.M. Xie, L.P. Wang, K. Zhao, Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer, Acta Metal. Sinica, 26 (2013) 754-760. 20. 骆宗安，王光磊，谢广明，王立朋，赵昆，铌夹层对真空轧制复合Ti不锈钢复合板的显微组织及性能的影响，中国有色金属学报，23（2013）3335-3340. 21. Z.A. Luo, G.M. Xie, G.D. Wang, G.L. Wang, H.G. Wang, L.J. Wang, Microstructure and mechanical properties of heavy gauge plate by vacuum rolling cladding, Steel Research Inter., 81 (2010) 51-53. 22. P. Xue, G.M. Xie, B.L. Xiao, Z.Y. Ma, L. Geng, Effect of heat input conditions on microstructure and mechanical properties of friction stir welded pure copper, Metall. Mater. Trans. A 41 (2010) 2010-2021.

专著： [1] 谢广明，骆宗安，崔洪波，搅拌摩擦焊接技术的研究，冶金工业出版社，165千字，2016。 [2] 骆宗安，谢广明，王光磊，真空制坯复合轧制技术与工艺, 冶金工业出版社，330000字，2014.10.01。 发明专利 1. 谢广明，崔洪波，骆宗安，王国栋，一种真空搅拌摩擦焊接装置及金属复合板制备方法，ZL104475967A。 2. 骆宗安，谢广明，崔洪波，王国栋，一种管线钢环形焊缝搅拌摩擦焊接机构，ZL104759750A。 3. 谢广明，王光磊，骆宗安，王国栋，防止真空复合ᠦ୔