2011.09 - 2014.10 大连理工大学 汽车工程学院 博士 2012.09 - 2013.09 萨里大学, 英国 机械工程系 公派联合培养博士 2005.09 - 2009.07 大连理工大学 工程力学系 学士

2019.12 - 至今 大连理工大学 工程力学系 副教授 2016.12 - 2017.12 昆士兰科技大学, 澳大利亚 机械工程系 访问学者 2015.01 - 2019.12 大连理工大学 工程力学系 讲师

科研项目 l 国家自然科学基金青年科学基金项目, 湿-热-交变载荷耦合作用下胶接结构强度退化预测模型研究, 主持. l 中国博士后科学基金面上资助, 异种材料胶铆接头多场耦合环境耐久性试验和建模研究, 主持. l 大连理工大学基本科研业务费项目-交叉探索科研专题, 栓-胶复合连接力学性能创成与退化机理, 主持. l 中国工程物理研究院合作课题, 环氧树脂粘接剂力学性能试验和建模评价, 主持. l 江苏奥新新能源汽车合作课题, 奥新2+2车型材料力学性能的试验测定, 主持. l ᠦ୔

发表学术论文 l X Han, G Akhmet, P Hu, WB Hou, Y Baubekov, M Akhmetov. Numerical prediction on the mechanical degradation of adhesively bonded corrugated sandwich beam after hygrothermal ageing[J]. Composite Structures, 2020, 241, 112131. IF: 4.829. l X Han, E Pickering, A Bo, YT Gu*. Characterisation on the hygrothermal degradation in the mechanical property of structural adhesive: A novel meso-scale approach[J]. Composites Part B: Engineering, 2020, 182, 107609. IF: 6.864. l X Han, YX Chao, P Yang, XY Li, W Zhang, Y Jin, CW Wu*. Strength prediction of adhesively bonded ferrite pillar-tin bronze plate under axial shear loading[J]. Journal of Adhesion Science and Technology, 2020, 34(6): 616-634. IF: 1.210. l C Wang, X Han, CX Yang, X Zhang, WB Hou. Assumed stress quasi-conforming formulation for static and free vibration analysis of symmetric laminated plates[J]. Engineering Computations, 2020. IF: 1.246. l G Akhmet, Y Yu, P Hu, WB Hou, X Han. Analysis of the performance of adhesively bonded corrugated core sandwich structures using cohesive zone method[J]. Journal of Sandwich Structures and Materials, 2020, 22(1): 104-124. IF: 5.015. l X Han, Y Jin, LFM da Silva, M Costa, CW Wu*. On the effect of adhesive thickness on mode I fracture energy - an experimental and modelling study using a trapezoidal cohesive zone model[J]. The Journal of Adhesion, 2020, 96:5, 490-514. IF: 2.366. l X Han, G Akhmet, W Zhang, YX Chao, Y Jin, Y Yu, P Hu*, A Ibraimov. The effect of adhesive fillet on mechanical performance of adhesively bonded corrugated sandwich structures: an experimental-numerical study[J]. The Journal of Adhesion, 2020, 96:5, 515-537. IF: 2.366. l W Zhang, X Bai, B Hou, Y Sun, X Han*. Mechanical properties of the three-dimensional compression-twist cellular structure[J]. Journal of Reinforced Plastics and Composites, 2020, 39(7-8): 260-277. DOI: 10.1177/0731684419888588. IF: 1.786. l GJ Zheng, C Liu, X Han, WD Li. Effect of spew fillet on adhesively bonded single lap joints with CFRP and aluminum-alloy immersed in distilled water. International Journal of Adhesion and Adhesives, 2020, 99, 102590. l Y Liu, S Zhou, X Han, CC Yan, ZL Lei, XF Wang. Analysis of the influence of a new type of buccal tube base mesh design on the adhesive layer stress distribution and bond strength. Journal of Adhesion Science and Technology, 2020. l TH Gao, L Ying, P Hu, X Han, H Rong, Y Wu, JS Sun. Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal small punch test: Experimental trials, numerical analysis[J]. Journal of Manufacturing Processes, 2020, 50, 1-16. l X Han, YX Chao, W Zhang, YZ Chao, CW Wu*. Study on the effect of post curing on the mode II fracture energy of structural adhesive using a parameter identification approach[J]. International Journal of Adhesion and Adhesives, 2019, 95: 102398. IF: 2.501. l WB Hou, XZ Xu, X Han, HF Wang, LY Tong*. Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles[J]. Thin-Walled Structures, 2019, 143, 106232. IF: 3.488. l P Hu, G Akhmet, CW Wu, X Han*, YX Chao, Y Yu, A Orazbayeva. Characterisation on the influence of curing history on the mechanical performance of adhesively bonded corrugated sandwich structures[J]. Thin-Walled Structures, 2019, 142: 37-51. IF: 3.488. l X Han, SQ Hou, L Ying, WB Hou*, H Aliyev. On the fracture behaviour of adhesively bonded CFRP hat-shaped thin-walled beam under axial crushing load: An experimental and modelling study[J]. Composite Structures, 2019, 215: 258-265. IF: 4.829. l 侯文彬, 刘璟琳, 陈广义, 韩啸*, 徐翔, 郑文献. 胶层缺陷对胶接-拉铆搭接剪切接头力学性能影响研究[J]. 机械工程学报, 2019, 55(24):37-44. EI. l X Han, Y Jin, W Zhang*, WB Hou, Y Yu. Characterisation of moisture diffusion and strength degradation in an epoxy-based structural adhesive considering a post-curing process[J]. Journal of Adhesion Science and Technology, 2018, 32(15): 1643-1657. IF: 1.210. l 韩啸*, 金勇, 杨鹏, 李小阳, 侯文彬. 胶层厚度对胶粘剂I型断裂韧性影响试验和仿真研究[J]. 机械工程学报, 2018, 54(10): 43-52. l 韩啸*, 金勇, 杨鹏. 结构胶接接头湿热环境耐久性研究概述[J]. 河北科技大学学报, 2017, 38(3): 209-217. l WD Li, LP Tang, X Han*, EP Gao. The effect of constant loading on the mechanical behavior of bulk adhesive[J]. The Journal of Adhesion, 2017, 93(12): 993-1007. IF: 2.366. l WD Li, M Ma, X Han*, LP Tang, JN Zhao, EP Gao. Strength prediction of adhesively bonded single-lap joints under salt spray environment using a cohesive zone model[J]. The Journal of Adhesion, 2016, 92(11): 916-937. IF: 2.366. l WD Li, B Pang, X Han*, LP Tang, KM Zhao, P Hu. Predicting the strength of adhesively bonded t-joints under cyclic temperature using a cohesive zone model[J]. The Journal of Adhesion, 2016, 92(11): 892-907. IF: 2.366. l 韩啸. 胶接接头湿热环境耐久性试验与建模研究[D]. 博士学位论文, 大连理工大学, 2014. l X Han, AD Crocombe, SNR Anwar, P Hu, WD Li. The effect of a hot–wet environment on adhesively bonded joints under a sustained load[J]. The Journal of Adhesion, 2014, 90(5-6), 420-436. IF: 2.366. l X Han, AD Crocombe, SNR Anwar, P Hu. The strength prediction of adhesive single lap joints exposed to long term loading in a hostile environment[J]. International Journal of Adhesion & Adhesives, 2014, 55, 1-11. IF: 2.501. l P Hu, X Han, LFM da Silva, WD Li. Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model[J]. International Journal of Adhesion & Adhesives, 2013, 41, 6-15. IF: 2.501. l 韩啸, 李伟东, 胡平. 非平衡胶接接头循环温度场强度退化研究[J]. 机械工程学报, 2012, 48(18), 97-103.