（1）多元烷烃相变微胶囊设计、制备及其深冷储能特性，国家自然科学基金面上项目，负责。 （2）熔渣转盘离心粒化液膜流动特性与相界面破碎、断裂行为的研究，国家自然科学基金青年基金，负责。 （3）高炉熔渣余热回收渣粒行为与传热特性研究，江苏省高校自然科学研究重大项目（A类），负责。 （4）微细多孔介质内高温熔盐强化蓄热特性研究，江苏省自然科学基金面上项目，负责。 （5）液态熔渣转盘干法粒化及余热回收关键技术研究，江苏省第五期“333工程”培养资金资助项目，负责 （6）汽车EGR系统的真空镍基钎焊不锈钢冷却器关键技术研究，江苏省六大人才高峰资助项目（B类），负责。 （7）肋板蜂窝结构相变储热系统固液耦合传热特性与储热机理的研究，江苏省自然科学基金面上项目，负责。 （8）太阳能热利用高温层叠肋板相变蓄热器传热机理研究，江苏省高校自然科学面上项目，负责。 （9）石化工业典型余热利用关键技术开发与示范，国家科技支撑计划，主要参加。 （10）非稳态不均匀高能流密度热载荷作用下塔式热板吸热器传热机理与寿命研究，国家自然科学基金面上项目，主要参加。

1. Hao Peng,Zhiwei Hu, Xuekun Shana, Xiang Ling, Lin Liu, Study on the solidification characteristics of molten slag droplets cooled by mixed cooling medium. Applied Thermal Engineering,149: 939-949,2019. 2. Hao Peng, Xuekun Shan, Yu Yang, Xiang Ling, A study on performance of a liquid air energy storage system with packed bed units.Applied Energy,211: 126~135,2018. 3. Hao Peng, Xuekun Shan, Xiang Ling, Dongxiang Wang, Juan Li, Ligament-type granulation of molten slag in different rotary disk configurations.Applied Thermal Engineering,128 1565-1578,2018. 4. Hao Peng, Xuekun Shan, Jingqi Kang, Xiang Ling, Dongxiang Wang, Influence of rotary disk configurations on droplets characteristics in molten slag granulation for waste heat recoveryApplied Thermal Engineering,135: 269-279,2018. 5. Hao Peng,Dong Zhang, Xiang Ling, Yang Li, Yan Wang, Qinghua Yu, Xiaohui She, Yongliang Li, and Yulong Ding, n‑Alkanes Phase Change Materials and Their Microencapsulation for Thermal Energy Storage: A Critical Review,Energy Fuels, 32: 7262−72932,2018. 6. Hao Peng,Xiang Ling,Dongxiang Wang, Na Wang, Experimental Investigation on Transition Characteristics of Different Rotary Disk Configurations.Industrial & Engineering Chemistry Research,56, 11281~11291, 2017. 7. Hao Peng,Yu Yang, Rui Li, Xiang Ling, Thermodynamic analysis of an improved adiabatic compressed air energy storage system.Applied Energy, 183: 1361~1373,2016. 8. Hao Peng, Na Wang, Dongxiang Wang, Xiang Ling, Experimental Study on the Critical Characteristics of Liquid Atomization by a Spinning Disk.Industrial and Engineering Chemistry Research,55: 6175~6185,2016. 9. Hao Peng, Lin Liu, XiangLing, Yang Li, Thermo-hydraulic performances of internally finned tube with a new type wave fin arrays.Applied Thermal Engineering, 98: 1174~1188,2016. 10. Hao Peng, Rui Li, Xiang Ling, Huihua Dong, Modeling on heat storage performance of compressed air in a packed bed system.Applied Energy, 160: 1~9,2015. 11. Hao Peng, Xiang Ling,Predicting thermal–hydraulic performances in compact heat exchangers by support vector regression. International Journal of Heat and Mass Transfer,84: 203~213,2015. 12. Hao Peng,Huihua Dong,Xiang Ling. Thermal investigation of PCM-based high temperature thermal energy storage in packed bed.Energy Conversion and Management, 81: 420~427,2014. 13. Hao Peng, XiangLing,Juan Li. Performance investigation of an innovative offset strip fin arrays in compact heat exchangers .Energy Conversion and Management, 80: 287~297,2014. 14. Hao Peng, Juan Li, Xiang Ling. Study on heat transfer performance of an aluminum flat plate heat pipe with fins in vapor chamber.Energy Conversion and Management, 74: 44~50,2013. 15. Hao Peng, Xiang Ling, Juan Li.Numerical simulation and experimental verification on thermal performance of a novel fin-plate thermosyphon.Applied Thermal Engineering, 40: 181~188,2012. 16. Hao Peng, Xiang Ling.Analysis of heat transfer and flow characteristics over serrated fins with different flow directions .Energy Conversion and Management, 52: 826~835,2011. 17. Hao Peng, Xiang Ling, En Wu.An improved particle swarm algorithm for optimal design of plate-fin heat exchangers .Industrial and Engineering Chemistry Research, 49: 6144~6149,2010. 18. Hao Peng, Xiang Ling.Neural networks analysis of thermal characteristics on plate-fin heat exchangers with limited experimental data . Applied Thermal Engineering, 29: 2251~2256,2009. 19. Hao Peng, Xiang Ling. Optimal design approach for the plate-fin heat exchangers using neural networks cooperated with genetic algorithms.Applied Thermal Engineering, 28: 642~650,2008. 20. Hao Peng, Xiang Ling. Numerical modeling and experimental verification of flow and heat transfer over serrated fins at low Reynolds number.Experimental Thermal and Fluid Science, 32: 1039~1048,2008.